Frequency Setup - Kenwood ProTalk DIGITAL TK-3701D User Manual

FREQUENCY SETUP

During Setup Mode Selection, rotate the Selector to select a channel number.
1
• The transceiver announces the zone number and channel number.
Press the PTT switch to set the channel number.
2
Press the Side 1 or Side 2 button to select the Frequency Setup Mode.
3
• The transceiver announces "Channel".
Press the PTT switch to enter Frequency Setup Mode.
4
Press the Side 1 or Side 2 button to increment/ decrement the frequency table
5
number, to select the new channel frequency.
• Voice announcement: "Analogue Table X" (X = 1 to 16 for Analogue
Frequency).
• Voice announcement: "Digital Table X" (X = 1 to 32 for Digital Frequency).
• Table numbers and their corresponding operating frequencies are provided
in the table {p. 15}.
• A voice announcement will inform you of the currently selected frequency
table number.
Press the PTT switch to temporary save the selected frequency table number.
6
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 6 to set up another channel.
Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
7
• The transceiver announces "Confirm".
Press the PTT switch to save the setting and return to zone selection.
8
• Beep B (2 beeps) will sound.
Note:
◆ The transceiver will automatically return to normal operation if no action is performed for
20 seconds.
14