Kenwood ProTalk DIGITAL TK-3701D User Manual page 21

To change the functions of the Side 1 and Side 2 buttons:
With the transceiver power OFF, press and hold the Side 1 and Side 2 buttons
1
while turning the transceiver power ON.
• Continue to hold the Side 1 and Side 2 buttons until the LED lights yellow
and the transceiver announces "Setup".
Release the button.
2
Press and hold the button to be reprogrammed (either the Side 1 or Side 2
3
button).
• The transceiver will announce "Table zero".
Release the button.
4
Press the Side 1 or Side 2 button to increment/ decrement the number, to
5
select the new button function.
• Table numbers and their corresponding functions are provided in the table
{p. 20}.
• A voice announcement will inform you of the currently selected table number.
Press the PTT switch to save the setting.
6
• Beep B (2 beeps) will sound and the transceiver will announce the new table
number.
Turn the transceiver power OFF and then ON again to activate the new settings.
7
Note:
◆ The transceiver will automatically return to normal operation if no action is performed for
20 seconds.
21