Installing The Optional Speaker/ Microphone - Kenwood TK-3202-1 Instruction Manual

Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks using the supplied screw.
Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the cap or the speaker/microphone connector.

Installing the Optional Speaker/ Microphone

1 Insert the speaker/ microphone plugs into the SP/MIC jacks.
2 Install the speaker/microphone locking Holder over the plugs using the supplied screw.
TK-2202 FCC ID:ALH36913210
TK-3202-1 FCC ID:ALH36923210
TK-3202-2 FCC ID:ALH36923220
IC:282D-36913210
IC:282D-36923210