Windows 2000; Windows 98Se - ZiLOG ZUSBOPTSC01ZACG User Manual

2. In the Wizard, select Install from a list or specific location (Advanced); then click
Next.
If the Windows Logo testing dialog appears, select Continue Anyway.
Note:
3. Select Search for the best driver in these locations and Include this location in
search.
4. Browse to the driver directory, one of the following:
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
5. Click Next, and then click Next again after the appropriate driver is found.
6. Click Finish to complete the installation.

Windows 2000

1. Connect the USB Smart Cable to the host PC for the first time.
The Found New Hardware Wizard should activate automatically.
2. In the Wizard, click Next.
3. Select Search for a suitable driver for my device (Recommended); then click Next
4. Select Specify a location; then click Next.
5. Browse to the driver directory, one of the following:
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
6. Click OK, and then click Next after the appropriate driver is found.
7. Click Finish to complete the installation.

Windows 98SE

1. Connect the USB Smart Cable to the host PC for the first time.
The Found New Hardware Wizard should activate automatically.
2. In the Wizard, click Next.
3. Select Search for the best driver for your device (Recommended); then click Next
4. Select Specify a location; then browse to the driver directory, one of the following:
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
5. Click Next, and then click Next again after the appropriate driver is found.
UM019502-0606
Opto-Isolated USB Smart Cable
Installing the USB Smart Cable and Driver
User Manual
Page 3