Monitor Test - NAMCO WORLD KICKS Operator's Manual

6-2-4

Monitor Test

1. Select "MONITOR TEST" on the menu screen to test and adjust the
Monitor. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button. To return to the Monitor Test Menu from a test pattern press
the Enter button.
3. Select "EXIT" and press the Enter button to return to the menu screen.
GRADATION PATTERN
CROSSHATCH PATTERN (CRT)
CROSSHATCH PATTERN (PROJ)
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJ)
FULL WHITE
EXIT
SELECT SW :CHOOSE
a) Displays a colour gradation pattern.
b) Displays a crosshatch pattern for CRT monitors. (Not used for projectors)
c) Displays a crosshatch pattern for projectors. (not used for CRT monitors)
d) Displays a white square. (H or light)
e) Displays a white square. (M or medium)
f) Displays a white square. (L or dark)
g) Displays an interlace pattern.
h) Displays an adjustment screen for CRT monitors. (Not used for projectors)
i) Displays an adjustment screen for projectors. (Not used for CRT monitors)
j) Displays an entire white screen.
MONITOR TEST
................................................ (a)
................................................ (b)
................................................ (c)
................................................ (d)
................................................ (e)
................................................ (f)
................................................ (g)
................................................ (h)
................................................ (i)
................................................ (j)
ENTER SW : ENTER
Page 53