Walker H24d Operator's Manual page 74

Maintenance Instructions
DO NOT try to straighten a blade that is
bent. NEVER weld a broken or cracked
blade. ALWAYS replace with a new blade
to assure safety.
Reinstall the blades following procedure from
Sharp en Mower Blades instructions in CHECK-
ING/SERVICING in this section. If blades are re­
placed, always use Walker original equipment
blades to ensure safety and optimum performance.
The quality and performance of replacement
blades offered by other manufacturers cannot be
guar anteed, they could be dangerous.
ALWAYS use genuine factory replace-
ment parts. Substitute parts CAN result
in prod uct malfunction and possible in-
jury to the operator.
70
WARNING
CAUTION
REPLACING/REPAIRING