Walker H24d Operator's Manual page 19

Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Deck Housing Under Footrest
Part Number: 2749-3
1. Deck drive belt routing.
DR64 BELT P/N 2731-5
Location: Deck Housing Under Footrest
Part Number: 2749-7 (DR64)
1. Deck drive belt routing.
Location: Deck Discharge Shield (DS60)
Part Number: 5848-3
1. Warning – thrown object hazard.
● Always keep the discharge shield in the low­
est position when operating.
● Do not remove the discharge shield.
1.
Location: Front of Body on Right Side
Part Number: 2807-9
1.
2.
1.
3.
4.
BELT TWIST
2749-7
1.
Location: Underside of Panel Behind
Part Number: 2107-5
1.
2.
1.
3.
Glow plugs activation indicator light.
Battery charging system malfunction indicator
light.
Low engine oil pressure warning light.
High engine coolant temperature warning light.
Operator Seat
Ground drive belt routing.
PTO clutch belt routing.
2.
4.
1.
2.
15