Braun Oral-B PRO 6000 Manual page 7

English
Important Information
• Your Oral-B toothbrush can be used with
your smartphone (find details under
«Connecting your toothbrush to your
Smartphone»).
• To avoid electromagnetic interference and/
or compatibility conflicts, deactivate the
radio transmission of your toothbrush
handle (5) before using it in restricted
surroundings, such as aircrafts or specially
marked areas in hospitals.
• Deactivate radio transmission by
simultaneously pressing the on/off (3) and
mode button (4) for 2 seconds until the
radio transmission display (7) goes off.
Follow the same procedure to reactivate
transmission again.
• Persons with pacemakers should always
keep the toothbrush more than six inches
(15 centimeters) from the pacemaker while
turned on. Anytime you suspect
interference is taking place, deactivate the
radio transmission of your handle.
Description
1 Brush head
2 Smart Ring
3 On/off button
4 Brushing mode button
5 Handle
6 Brushing mode display
7 Radio transmission display (with
Bluetooth® wireless technology)
8 Charge level display
Accessories (depending on model):
9 Basic charger (with fixed cord)
10 Brush head holder
11 Brush head compartment with protective
cover
12 Charging travel case
12a Charge indicator light
12b USB port
12c Power cord port
12d Inner lid (with smartphone holder)
12e Removable inlay
13 Power cord (power supply)
14 Charging stand (with detachable cable)
15 Smartphone holder
15a Holding brackets
15b Lever arm
15c Pull tab
15d Suction cup
16 Travel case (with removable inlay)
17 Basic travel case
Note: Content may vary based on the model
purchased.
Specifications
For voltage specifications refer to the bottom of
the charging unit.
Noise level: 68 dB(A)
Charging and Operating
Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
• You may use your toothbrush right away or
charge it briefly by placing it on the
plugged-in basic charger (9) or charging
stand (14). When using the charging stand
(14) use the extra power cord (13) provided
(picture B). The power cord may be used for
all global mains voltage ranges (100 -240V).
Note: In case the battery is empty (no lights
illuminated on charge level display (8) while
charging or no reaction when pressing the
on/off button (3)), charge at least for 30
minutes.
• The charge level is indicated on the charge
level display (8). Flashing lights indicate that
the battery is charging (picture ➀/B); once it
is fully charged, the lights turn off. A full
charge typically takes 12 hours and enables
at least 2 weeks of regular brushing (twice a
day, 2 minutes).
Note: At a very low charge level, the lights
might not flash immediately; it can take up
to 30 minutes.
• If the battery is running low, a red light is
flashing on the charge level display and the
motor is reducing its speed. Once the
battery is empty, the motor will stop; it will
need at least a 30-minute charge for one
usage.
• You can always store the handle on the
plugged-in charger to maintain it at full
power; a battery overcharge is prevented by
device.
7