Krell Industries Vanguard Series Owner's Reference Manual page 11

Vanguard Integrated Amplifier/Digital Vanguard Integrated Amplifier - Operating the Vanguard
will also appear on a web connected device. Press the
Left button to return to the Source Setup Menu.
Theater Mode
Theater Mode bypasses the Vanguard's volume con-
trol and passes the left and right output of a surround
processor directly to the Vanguard's left and right
amplifiers. Use the Left and Right buttons to highlight
the input that is connected to the surround proces-
sor. Press the Enter button and the cursor will begin
flashing in the Disabled field. Press the Up or Down
buttons to change to Enabled and press the Enter but-
ton to select.
Note: Turn down volume on surround processor be-
fore setting Theater Mode.
Level Trim (VIA, DVI, DAC)
The level trim allows for output adjustment between
sources. Press the Enter button and the source field
will start flashing. Press the Up or Down buttons to
select a different source to edit. Press the Enter button
and the dB field will begin flashing. Press the Up or
Down buttons to increase or decrease output. When
finished, press the Enter button and then the Left but-
ton to return the Source Setup sub menu.
Network Setup
Press the Up or Down buttons to view the various
network parameters. Press the Enter button to see the
value for the displayed parameter.
Left Button
Up Button
www.krellonline.com
Vanguard Family - Owner's Reference
Right Button
Down Button
IP Address
The default network discovery is DHCP. If the
Vanguard is connected to an active network, it
automatically acquires an IP address. To enter an IP
address manually, change the Vanguard to Static IP
operation. To change to Static IP operation, press the
Enter button at the IP Address sub menu. Press the Up
or Down buttons to change the setting to Static. Press
the Enter button to display the IP address. Press the
Right button to move the cursor to the number to be
edited. Press the Enter button again and the selected
number of the IP Address will begin blinking. Use the
Up or Down buttons to edit the IP Address value.
Press the Enter button to confirm change. Press the
Left or Right button to move the cursor to another
number in the IP address and repeat editing process.
Use the same process to edit the other network
settings.
Note: the MAC Address is a factory set value and is
not user editable.
Operation Mode (DAC)
The Operation Mode allows user to select between
DAC or Preamp functionality. The DAC
functionality bypasses volume control whereas
Preamp utilizes built in volume control. Press the
Enter button and the cursor will begin flashing. Press
the Up or Down buttons to change between DAC or
Preamp options. Press the Enter button to select.
NOTE: Turn down volume on surround processor
before setting Operation Mode to DAC.
© 2015 by Krell Industries, LLC
11
All rights reserved