Use - IKEA FULLSTÄNDIG Manual

ENGLISH
WARNING: if no plug is fitted
(direct wiring to the mains), or
if the socket is not located in an
accessible place, a qualified
electrician should install a

Use

The hood has been designed to be installed and
used either as a "Extraction installation", or as a
"Recirculation installation".
Extraction installation (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct (not
supplied), fitted to the hood steam outlet.
Ensure that the discharge duct is correctly fitted
to the air outlet, unit using an appropriate
connection system.
Important: If already installed, remove the
charcoal filter/s.
Recirculation installation (see symbol
installation booklet)
The air is filtered through one or more the
charcoal filters, and then resent into room.
standardised double pole power
switch that will enable complete
isolation from the mains in case of
category III overvoltage conditions,
in accordance with wiring rules.
Important: Ensure appropriate air circulation
around the hood.
Important: If the hood is supplied without
charcoal filters, these must be fitted before the
in
hood can be used. Filters are available in IKEA
shops.
The hood should be installed away from
particularly dirty areas, windows, doors and heat
sources.
The accessories for wall fixing are not included
because walls made of different materials require
different types of fixing accessories. Use fixing
systems suitable for the walls of your home and
the weight of the appliance. For more details,
contact a specialized dealer.
in
Keep this booklet for future consultation.
7