auna 10032013 Manual page 39

Note: In the mode of 'ON' (DHCP),the unit will check the IP address of
wireless network and link the network automatically. In the mode of
'OFF' (DHCP), the unit will not check the IP address of wireless network
and link the network automatically.
Check Network when Power On
Functions: When "Power On", choose "Enable" to check the status of
network link automatically; choose "Disable" not to check it.
Note: If the network is not linked on the mode of "Enable",it will
automatically show the choices for you to set up the network.
Date and Time
1 Press Menu Configuration. Press OK to confirm.
2 Press Rotate Navigate button to choose "Date & Time".
3 Press OK button to enter the interface.
Set Date and Time
• Manual Setup: You can manual set the date and time.
• Auto Detect (UTC+00:00). 00:00 means the time Difference between
server and local time.
Set Time Format
The format of 24 hour is default. You can also choose 12 hour.
Set Date Format
The format of DD/MM/YYYY is default. You can also choose:
• YYYY/MM/DD
• MM/DD/YYYY
EN
39