Ec Declaration Of Conformity; Cleaning And Maintenance - Bresser 70-01800 CM3000 Instruction Manual

NOTE!
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock,
dust, extreme temperature or high humidity, which
may result in malfunction, shorter electronic life
span, damaged batteries and distorted parts.
RISK of property damage!
Do not disassemble the device. In the event of a de-
fect, please contact your dealer. The dealer will con-
tact the Service Centre and can send the device in to
be repaired, if necessary.
Use only the recommended batteries. Always re-
place weak or empty batteries with a new, complete
set of batteries at full capacity. Do not use batteries
from different brands or with different capacities.
Remove the batteries from the unit if it has not been
used for a long time.
The manufacturer is not liable for damage related to
improperly installed batteries!

EC Declaration of Conformity

Bresser GmbH has issued a "Declaration
of Conformity" for this device (Wall Clock
/ Art.No.: 70-01800) in accordance with
applicable guidelines and corresponding
standards of Directive 1999/5/EG.

Cleaning and Maintenance

Before cleaning the device, disconnect it from the
power supply (Only use a dry cloth to clean the ex-
terior of the device. To avoid damaging the electron-
ics, do not use any cleaning fluid.
Protect the device from dust and moisture. The
batteries should be removed from the unit if it has not
been used for a long time.
GB
15