Using The Alarm - Philips AJ100/12 User Manual

Philips clock radio aj100
Hide thumbs Also See for AJ100/12:
Table of Contents

Advertisement

USING THE ALARM

GENERAL
Two different alarm times can be set. This can be useful when you need to be
woken up at a different time e.g. during the week and at the weekend:
• ALARM
- radio mode
• ALARM
- buzzer mode. The gentle wake buzzer alarm increases its beep tone
frequency within seconds.
SETTING THE ALARM TIME AND MODE (See 3 )
1. Check the radio is switched off.
2. Press ALARM
™ Display: OFF disappears under the respective
3. Press and hold SET AL
4. Hold down or press HR + or MIN + repeatedly to set and adjust the hours
and minutes respectively. Release HR + or MIN + when you have reached
the correct setting.
5. After both the hours and minutes are set, press SET AL
confirm the setting.
Helpful hints:
– If you have selected ALARM
station before turning off the set.
– If you set and activate the same time for both alarms, only the ALARM
activate at the set time.
– When both ALARM
shows the alarm time nearest to activtion.
– To check the alarm time setting for ALARM
ALARM
button.
– It is not possible to adjust the alarm time during an alarm call or the repeat alarm
mode.
or ALARM
to on.
or SET AL
, make sure you have properly tuned to a
and ALARM
AL
or
until alarm time digits flash.
are turned on, by default the display
or ALARM , press ALARM
AL
icon.
or SET AL
to
will be
or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj100Aj100/05

Table of Contents