Transport And Start Up; Transport And Installation; Assembly - Jet JRT-2 Operating Instructions Manual

4.4 Unit description
A ........ Mitre gauge
B ........ Adjustable fence
C ........ Lateral workpiece guide
D ........ Workpiece hold down
E . ........ Dust port
F . ........ Hole for router height adjustment
G ........ Table extensions
H ........ Legs
I.......... Machine table
J ......... Magnetic On/ Off switch
K ........ Support s
L . ........ Feather board
R ........ Switch overload cut‐off
5. Transport and start up
5.1 Transport and installation
The tool is designed to operate in closed rooms and must be
placed stable on firm and levelled surface.
The tool can be bolted down.
Fig 1
Fig 2
5.2 Assembly
If you notice any transport damage while unpacking, notify
your supplier immediately. Do not operate the machine!
Dispose of the packing in an environmentally friendly manner.
Attach the Legs:
Attach the legs (H, Fig 3) to the table (I) with the supplied pan
head screws and nuts (L).
Attach the Switch:
Attach the switch (J, Fig 1) with 2 screws.
Attach the Table Extensions (Fig 4):
Attach the table extensions (G, Fig 1) and supports (K) with pan
head screws and nuts.
Attach the Router (Fig 5, Fig 6):
Attach the router to the mounting plate (T, Fig 5) by use of
supplied screws (U).
6
Fig 3
Fig 4