Smart Diagnosis - LG LT23BPP Owner's Manual

SMART DIAGNOSIS (Only for applied models)
Smart diagnosis function is...
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
How to use the function
First, call to the LG service center. Only use the Smart Diagnosis feature when instructed to do so by
the LG call center agent.
1.
Open all the doors of the refrigerator.
• S DS can be input even Test Mode and Error status.
Middle Notch
(Mid)
2. T urn knob to Middle notch.
3. Turn knob to Warm notch and keep that status
4. T urn knob to Cold notch within 3sec and keep that status
5. Turn knob to Middle notch within 3sec and keep that status
6. Place the phone near the speaker hole in the top right hand side door hinge
Ensure the microphone of the telephone is toward the speaker hole.
Do not take away the telephone while data is being transmitted.
During the data transmission for smart diagnosis, hold the telephone 10cm away from the speaker hole
and avoid any background noises.
CAUTION
w
The transmission sound may be irritating. Do not take away the telephone until the sound stops.
7. When SDS is input, buzzer let you know by ringing 4times.
(Frequency of SDS Buzzer is 2000Hz,
After inputting SDS, SDS buzzer will ring.
8.
After the completion of the data transmission, the consultant will explain the result of the smart diagnosis
9.
and advise accordingly.
When the data transmission is completed, the refrigerator will be automatically turned off and on a few
seconds later.
Be aware!
Differences of regional call qualities may have influence on the function.
If you use a home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone with
poor cell reception
Warm Notch
(Min)
for 2se c.
0.2sec Off/ 0.2sec On 4times)
23
Cold Notch
(Max)
for 2se c.
for 2se c.
Middle Notch
(Mid)