Tips On How To Use Pinpointer; Specifications - Teknetics Tek-Point Owner's Manual

TIPS ON HOW TO USE PINPOINTER:

The Tek-Point is a powerful tool that will drastically reduce the time you spend
recovering buried objects while metal detecting.
If the target is close to the surface (3 inches or less) the
Tek-Point can detect the buried target prior to digging.
Detection from the surface can decrease the size of
the plug you dig, causing less damage to the sod.
The detection area on the Tek-Point is 360° along
the tip and barrel of the probe. For precise
pinpointing, use the tip of the probe. For larger
areas use a flat side-scan technique passing the
length of the barrel over the surface to cover a larger area.
The Tek-Point will detect all kinds of metal including ferrous and non-ferrous metals.
The target alert (audio or vibratory) is proportional, meaning the intensity of the
alert will increase as you get closer to the target.
Technology:
SPECIFIC TIONS:
Pulse rate:
Sample delay:
Response:
Sensitivity levels:
LED levels:
Overall size (WxDxH): 240mm x 45mm x 35mm
Weight:
Humidity range:
Temperature range:
Volume SPL spec:
Waterproof:
Electrical Rating:
Batteries:
Battery life:
Pulse Induction, bipolar, fully static
2500pps, 4% offset adjust
15us
Audio and/or vibratory
3
20
180g
4% to 100% R.H.
0°C to +60°C
Maximum SPL = 70dB @ 10cm
6 feet for 1 hour
3V --- --- 100mA
(2) AA
Alkaline
NiMH rechargeable 15 hrs
Lithium
25 hrs
50 hrs