Subscribe to Our Youtube Channel
Related Manuals for Ingersoll-Rand 44SMA
Summary of Contents for Ingersoll-Rand 44SMA
- Page 1 16572554 Edition 2 May 2014 Air Drill 44SMA, 44SMA-EU Maintenance Information Save These Instructions...
- Page 2 Backhead (14) with Ingersoll Rand tool as follows: No. 10 Oil. Work 1 – 2 cc of Ingersoll Rand No. 28 Grease 3. Inject 2 or 3 drops of light oil into the oil hole in the through the Grease Fitting (15 and 54).
- Page 3 8. Assemble the Spindle (41) and gearing in the Gear Case (53). speed. The correct governed free speeds for Model 44SMA Drills Install this assembly as a unit on the Motor Housing.
- Page 4 Trouble Probable Cause Solution Air leaks Worn Throttle Valve Face or Replace worn parts. Throttle Valve Face Cap Oil Chamber Plug worn or not tight Tighten the Plug. If the problem persists, replace the Plug. Gear Case gets hot Insufficient grease Clean and inspect the Gear Case gearing parts and lubricate as instructed in LUBRICATION.
- Page 5 Notes...
- Page 6 Notes...
- Page 7 Notes...
- Page 8 © 2014 Ingersoll Rand...
Need help?
Do you have a question about the 44SMA and is the answer not in the manual?
Questions and answers