Other Features; Set The Alarm Timer; Set The Sleep Timer - Philips DC290/93 User Manual

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly. (See "Get started - Set time
and date".)
2
Press and hold ALM 1 or ALM 2 for 2
seconds.
»
[AL 1] or [AL 2] begin to blink.
3
Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone, FM
tuner, or buzzer.
4
Press ALM 1 or ALM 2.
»
The hour digits begin to blink.
5
Press / repeatedly to set the hour.
6
Press ALM 1 or ALM 2 to confirm.
»
The minute digits begin to blink.
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
•
If you set iPhone/iPod pla
source, you must create a playlist in iTunes
called "PHILIPS" and import it to your iPhone/
iPod.
•
If no playlist is created in the iPod/iPhone or
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
14 EN
ylist as the sound
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
»
If the timer is activated, [
[ AL2] is displayed.
»
If the timer is deactivated, [
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
»
The alarm repeats ringing minutes later.
Tip
•
You can press / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
»
The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
»
When the sleep timer is activated, the
display shows
gradually decrease in the last 5 minutes.
AL 1] or
AL1] or
, and the volume will