Table of Contents
Advertisement
1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Prepare the remote control
Caution
•
Risk of explosion! Keep batt
heat, sunshine or fire. Never discard batteries
in fire.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
2
Open the battery compartment.
3
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
4
Close the battery compartment.
Note
•
Before you press any function button on the
remote control, first select the correct source
with the remote control instead of the main
unit.
Connect power
Caution
•
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
•
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
10
EN
eries away from
Note
•
The type plate is located on the bottom of the
main unit.
1
Connect the AC power cord to the wall
outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
»
[24 HR] begins to blink.
2
Press OK/
to select the 12/24 hour
format.
3
Press SET TIME/PROG to confirm.
»
The hour digits begin to blink.
4
Press / to set the hour.
5
Press SET TIME/PROG to confirm.
»
The minute digits begin to blink.
6
Repeat steps 4-5 to set the minute, year,
month, and day.
Tip
•
In 12 hour format,
displayed.
•
in 24 hour format, [DAY--MONTH] is
displayed.
MP3 LINK
FM
ANTENNA
[MONTH--DAY] is
Advertisement
Table of Contents
