Table of Contents
Advertisement
5
Detailed View
3. Control Panel
6. Trigger Key
5. Status LED
No.
Name
1
Scan Window
2
Mounting Holes
3
Control Panel
4
Buzzer Holes
5
Status LEDs
6
Trigger Key
7
Mode Key
SPECIFICATIONS MANUAL
4. Buzzer Holes
7. Mode Key
Figure 1: Detailed View of NLV-5201
Light paths of the imager, LED illumination and aiming. Ensure that
the lens is free from dust and dirt before scanning.
Screw holes that can be used to mount the scanner. 2 holes on the
bottom and side. Refer to the mechanical drawing for the mounting
holes dimension.
The screw hole is M3, effective depth 3.5mm.
Control panel to execute Test mode, Tuning mode and Aiming mode.
Can also select the bank.
Sound from a built-in buzzer comes out through these holes. When
they are covered, the buzzer sound will be diminished. The sound
varies depending on the settings. Buzzer sound settings are
configurable for frequency, loudness and duration.
Indicates status by the combination of 3-color LEDs (red, orange,
green).
Refer to 6.4 LED Indicator Specifications for detail.
Default is trigger key. When selecting mode, it operates as execution
key.
The key to select and cancel the mode. Shift to bank select mode by
long press.
1. Scan Window
2. Mounting Holes
Description
NLV-5201
1st
X X X X X X
6
Advertisement
Table of Contents
