Table of Contents
Advertisement
ing instructions, or as recommended by your Physician.
• Make sure the power switch is in the "OFF" position.
• Unwrap power cord.
• Place compressor so that the rubber feet are resting on a level, sturdy
surface and upon which the controls can be easily reached when seat-
ed. Never block the air openings of the product or place it on a bed or
couch where the air openings may be blocked.
• Plug power cord into an appropriate wall outlet.
Compressor/nebulizer must be operated on the specified power
source to avoid risk of electric shock and damage to the com-
pressor. See instrument bottom panel for power details.
Wash hands. Ensure hands are dry.
• Assemble clean nebulizer parts by
placing baffle down in medication cup.
• Open the medicine cup cap and put the
medicine from medicine vial into the
medicine cup (А). Close the medicine
cup cap tightly (В).
• Attach one end of the tube to the
medicine cup (С).
• Connect another end of the nebulizer
tubing to the compressor air-outlet
connector (D).
(NOTE: during high humidity weather
conditions, condensation, water build
up can occur in the nebulizer tubing).
• Assemble mouthpiece, or mask and
T-piece (if applicable) and insert into the
top of the nebulizer cap (E, F).
• Press the power switch "ON" position
to start the compressor as aerosol being to flow, inhale deeply and
slowly, hold & then exhale slowly. Follow instructions as given by your
physician. If treatment needs to be interrupted, simply press power
switch "OFF".
• When treatment is complete, turn unit "OFF" by pressing the power
switch to the "OFF" position. Unplug the unit from the wall power outlet.
8
A
B
C
D
E
F
Advertisement
Table of Contents
