Table of Contents
Advertisement
Note: If the suggested remedy does not solve the problem, do not
try to repair the device. Shut off the device for about 1 hour and
then restart the machine. If the problem persists contact your authorized
service provider. Do not disassemble the unit yourself, no user serviceable
parts inside, risk of electric shock.
Before servicing by authorized service personnel. To completely isolate
the device from the power source unplug the plug from the power source.
TECHNICAL SPECIFICATIONS
Power
Power max
Compressor air output
Medicine Bottle capacity
Nebulization rate
Nebulizer kit is
assembled incorrectly
Nozzle is blocked
Nebulizer kit is tilted at
a sharp angle
The air tube is folded,
creased or damaged or
blocked
Air filter is dirty
220 V AC, 50Hz
100 VA
2.5 bar, 8 LPM approximate
8 ml / max, 2ml - 7ml recommended
0.2 ml / min - 0,4 ml / min typical
(Weight loss Method)
EN
Assemble the
nebulizer kit correctly.
Make sure that the
nozzle is free of
blockages.
Make sure that the
nebulizer kit is not
tilted at an angle
of more than 45
degrees.
Make sure that the
air tube does not
contain kinks. Make
sure that air tube is
free of blockages
Replace the air filter
with a new one.
13
Advertisement
Table of Contents
