Maintenance; Functional Test - iHerz iWind Manual

Store in a zip lock bag.
Keep the outer surface of the tubing dust free by wiping regularly. Nebu-
lizer tubing does not have to be washed because only filtered air passes
through it.
Note: Do not towel dry nebulizer parts, this could cause contamination.
It is recommended to replace the medication nebulizer medicine cup
once a year or as directed by your doctor.
The Nebulizer kit is recommended for single patient use only to prevent
cross infection.
To prevent possible risk of infection from contaminated cleaning
solutions, always prepare fresh solution, for each cleaning cycle
and discard solution after each use.
Clean the nebulizer kit before using for first time after purchase.
Compressor Сleaning
• With power switch in the "OFF" position, unplug power from wall outlet plug.
• Wipe outside of the compressor cabinet with a clean damp cloth to
keep dust free.
Do not submerge in water, doing so will result in compressor damage.

Maintenance

Electric shock hazard. Do not disassemble compressor cabinet. All
disassembly and maintenance must be done by a qualified service
provider.
To completely isolate the device from the power source unplug the power
plug from the power source.

Functional test

• Before use check the parts are connected properly and securely
• The connections are not loose
• There is no damage to the parts
• The nozzle and tube is not blocked or and the compressor operated
normally
EN
11