Operation; Choosing A Sensor Area; Choosing A Lighting Duration - ALDI LIGHTWAY BMSL1233 User Manual

4. Choose mounting materials which are suitable for the
installation surface. The supplied screws
are suitable for concrete and brickwork.
5. Screw the rear panel into the locations for fastening
according to the properties of the installation surface. Do
not apply excessive force in the process.
6. Place the housing of the spotlight onto the rear panel.
7. Fasten the housing on the rear panel by screwing the
fixing screw tight.

Operation

Choosing a sensor area

You can configure the sensor area by turning the motion
sensor housing. The motion sensor housing can be turned by
90°. The sensor angle of approx. 140° does not change in the
process.
− Choose the required sensor area by turning the motion
sensor housing

Choosing a lighting duration

1. If necessary, turn the motion sensor housing
the controller for the lighting duration
2. Choose the desired lighting duration between approx.
5 seconds and approx. 7 minutes by turning the controller
in the corresponding direction:
• Turning the controller clockwise increases the lighting
duration.
• Turning the controller anticlockwise decreases the
lighting duration.
.
3
Operation
and dowels
12
to reach
3
.
7
13
19