ALDI LIGHTWAY BMSL1233 User Manual page 22

Troubleshooting
Fault
The LEDs
shine less
brightly.
The sensor
area is too
small.
The spotlight
turns on for
no obvious
reason.
The spotlight
switches on
throughout
the day.
22
Possible cause
The batteries are
almost spent.
Sunlight can cause
faults when setting
the sensitivity.
The following
movements or
heat sources can
activate the sensor:
Air conditioning
units, chimneys,
barbecues, street
lights, people,
animals or moving
vehicles.
Reflections from
a swimming pool,
a pond or other
reflective surfaces
are registered as
movement.
The sensitivity
controller is set too
high.
Solution
Insert new batteries.
Test the settings
again in the evening
and re-configure the
sensitivity if necessary.
Find a more suitable
location for mounting
the spotlight or change
the sensor area by
turning the motion
sensor housing
Re-configure the
sensitivity controller
or find a more suitable
location for mounting
the spotlight.
Reduce the sensitivity
by turning the
sensitivity controller
anticlockwise.
.
3
4
4