Mounting The Solar Panel; Operation; Choosing A Sensor Area - ALDI Lightway BMSL1232 User Manual

6. Place the housing of the spotlight onto the rear panel.
7. Fasten the housing on the rear panel by screwing the fixing
screw tight.

Mounting the solar panel

1. Choose a suitable surface for installation (see chapter
"Choosing an installation location").
2. Hold the wall bracket
mark the three locations for fastening. Use a spirit level if
necessary.
3. Choose mounting materials which are suitable for the
installation surface. The supplied screws
are suitable for concrete and brickwork.
4. Screw the wall bracket into the locations for fastening
according to the properties of the installation surface.
Do not apply excessive force in the process.
5. Completely unfold the charging cable and insert the plug
into the charging slot

Operation

Choosing a sensor area

You can configure the sensor area by turning the motion sensor
housing. The motion sensor housing can be turned by 90°. The
sensor angle of approx. 140° does not change in the process.
− Choose the required sensor area by turning the motion
sensor housing
on the installation surface and
10
on the housing.
5
.
3
Operation
and dowels
13 14
11
19