Power Supply - Philips AJ130/12 User Manual

English
Congratulations on your purchase, and wel-
come to Philips! To fully benefit from the
support that Philips offers, register your
product at www.philips.com/welcome.
Supplied accessory
– 1 X certified AC/DC 9V adapter
(Input: 100-240V ~ 50/60Hz 0.6A,
Output: 9V
– 1 X AUX cable
Controls (see 1)
1 REPEAT ALARM – pushes to switch off
alarm for a 5-minute period
2 LCD Display – shows the clock/ alarm time
or CD/radio information
3 9 – stops CD playback
– erases a CD program
4 SOURCE
– selects CD, radio or AUX source of sound
5 POWER
– switches the set on or to standby
– stops the active buzzer, radio or CD alarm
for 24 hours
– switches off the sleep timer
6 ); – starts/ pauses CD playback
7 HOUR/MIN/TUNING ∞/ §
– adjusts clock / alarm time
– skips CD tracks/ searches for a particular passage
– tunes to radio stations
8 Reset
– press if the set / display does not react to
operation of any button
9/% AL 1/ AL 2
– sets and activates alarm of ALARM 1 /ALARM 2
– stops the active buzzer, radio or CD alarm
for 24 hours
– switches off ALARM 1/ ALARM 2
0 REPEAT – repeats a track/CD program/
entire CD
SHUFFFLE – plays all tracks in random order
PRE 3, 4 – selects a preset radion station
! BRIGHTNESS – changes the brightness of
@ SLEEP
– switches off radio, CD for timer mode
Controls
1.5A)
the display illumination
– adjusts timer options for radio/CD playback
– views the remaining sleep time.
# Battery door – opens to insert 2 x 1.5V
$ AUX – 3.5mm audio input jack
^ VOLUME 3, 4 – adjusts sound level
& DISPLAY – displays CD tracks or radio
information
* PROGRAM/SET TIME
– sets clock/alarm time
– programs CD tracks
– programs preset radio stations
( DC 9V– socket for AC/DC 9V adapter
) Pigtail – FM antenna to improve FM
reception

Power supply

Mains Adapter.
1 Connect the mains adapter to the set's DC
9V socket and to the power socket.
Helpful hints:
To avoid damage to the set, use only the
adapter supplied!
The type plate is located on the bottom
of the set.
Clock memory backup
When a power failure occurs, the complete
clock radio will be switched off. When the
power supply returns, the time display shows
0:00 and you will need to reset the correct
time on the clock.
To retain the clock time and the set alarm time(s) in
the event of an AC power failure or disconnection,
insert 2 x 1.5 volt batteries, typed AAA (not sup-
plied) into the battery compartment.This will act as
a clock memory backup.
When powered by the battery, the time will not be
illuminated on the clock display, and operation of the
alarms, radio and CD are also impossible.As soon
as the AC power supply returns, the display will indi-
cate the correct time.
1 Insert the battery into the battery
compartment for clock memory backup.
2 Connect the power plug to the wall outlet.
Power supply
AAA batteries