Safety And Maintenance - Philips AJ260/05 User Manual

Philips weather clock radio aj260
Hide thumbs Also See for AJ260/05:
Table of Contents


Safety and maintenance

Safety and general
If you do not intend to use the clock radio
for a long time, withdraw the power cord
from the wall outlet.
Place the set on a hard and flat surface so
that the system does not tilt.
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
The apparatus shall not be exposed to drip-
ping or splashing
Do not expose the set, batteries, to humidity,
rain, sand or excessive heat caused by heat-
ing equipment or direct sunlight.
No objects filled with liquids, such as vases,
shall be placed on the appartus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste.The correct disposal of your old product will help prevent potential negative
consequences for the environment and human health.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separat-
ed into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.
The mechanical parts of the set contain
self-lubricating bearings and must not be
oiled or lubricated.
To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.

Hide quick links:


Table of Contents

Subscribe to Our Youtube Channel

This manual is also suitable for:


Table of Contents