AJ260 Clock Radio QUICK START Thanks for buying Philips AJ260 clock radio. Our Quick Start guides you through just some of the features on the set. Please read our instruction booklet to really rise & shine!
ENGLISH Step A • Connect the supplied mains adapter to the set’s 7.5V DC jack and the plug into a wall outlet. Step B How to set the Clock & Alarm time 1. Press and hold TIME SET / RCC SYNC or ALM1 / ALM2 until the time digits flash.
1. Place the sensor in a desired open area. The place must be within 50 meters away from the main unit. (Make sure that the sensor is loaded with 2 AA batteries.) • For the first time using the outdoor sensor and the main unit, press RESET located on the sensor back, and RESET located in the battery compartment of the main unit.