Agilent Technologies Infinium DCA 86100A Service Manual page 118

Instrument Modifications
Replacing A7A2, A8, or A9 Assemblies
Figure 6-6. Touch Screen Controller Bracket
23 Attach the new A8 Touch Screen Interface to the bracket using the supplies screws as shown in
figure 7. Us a T8 Torx with a 5 inch-pounds torque wrench.
Figure 6-7. Mount the Touch Screen Controller Assembly
24 Connect the new W2 Touch Screen Controller Serial Cable from A8JP7 to A4CN7 COM2
25 Connect the new W6 Touch Screen Controller Cable from A8JP5 To A7A2.
26 Connect the new W1 Touch Screen Controller Power Cable from A18P1 to A8JP4.
27 Connect the end of W33 that includes W1 Touch Screen Controller power to A18 P1 and the other
end of W33 to A4 CN 11.
6-8