Agilent Technologies Infinium DCA 86100A Service Manual page 115

Instrument Modifications
Replacing A7A2, A8, or A9 Assemblies
Figure 6-2. Removing the Cover Screws
Remove the two T-15 screws that secure each handle to the sides of the instrument, as shown in
Figure 6-3.
Figure 6-3. Removing the Side Handles
5 Turn the instrument upside down on the bench. Remove the calibration sticker that covers the
access plug on the bottom of the instrument. See Figure 6-3.
Figure 6-4. Calibration Access Plug
6-5