Connection; Connection With Quickwire Technology; Connecting The Coaxial Cable; Typical Maximum Reading Distance - Kaba 90 04 Technical Manual

Kaba Registration 90 01
5.4

Connection

5.4.1 Connection with quickwire
With the innovative quickwire technology, the wiring is performed completely separately from the
electronics on the mounting plate (rear panel or spacer frame). The electronics are mounted as a unit
during commissioning. The practical click connection makes mounting simpler and means the
registration unit is quickly changed in case of repair.
In addition, it is possible to upgrade from a registration unit without a PIN to a registration unit with PIN
with no or minimal changes to wiring.
5.4.2

Connecting the Coaxial Cable

Terminal Number
6
7
5.5

Typical Maximum Reading Distance

5.5.1

Reading and Writing Distance with Direct Mounting on Metal

If the registration unit is mounted directly on a metallic surface, the reading and writing distance is
approx. 10% smaller than an RFID neutral environment (wood, masonry).
24
TM
Technology
Meaning
Antenna cable shield wire
Antenna cable inner conductor
Control Unit
AS
A+
1 = Badge, ISO 14443A
2 = Key fob, ISO 14443A
3 = Badge, LEGIC RF
4 = Badge, ISO 15693
5 = Kaba elolegic smart key, LEGIC RF
TM_ RegistrationUnits_201406_en.docx