Table of Contents
Advertisement
Concealed cable mounting
2. Produce the hole for the cable feed-through on
site (≥ø10 mm).
NOTICE
Only connect the wires when the power is switched off.
3.
Screw the base frame to an even surface. The base frame must
not lose its shape.
Pull the cable through the base frame, lay it to the side of the
door, and connect it to the parent control unit.
Connections see Chapter 12.
4.
Insert the core device with its embedded electronics onto the
base frame and screw it tight.
TM_ RegistrationUnits_201406_en.docx
Kaba Registration Unit 90 04
Surface cable mounting
2. Break off the joint bar from the core device.
19
Hide quick links:
Advertisement
Table of Contents
