Dismantling; Conformity - Kaba 90 04 Technical Manual

4.5

Dismantling

1. Push the screwdriver (no. 00) into the bottom of
the opening and press the concealed spring
upwards.
2. At the same time, slightly pull out the bottom of
the front cover.
3. Remove the front cover.
4. Use a screwdriver (TORX T10) to loosen the
screws and remove the core device parallel
towards the front.
4.6

Conformity

See Chapter 12.
TM_ RegistrationUnits_201406_en.docx
Kaba Registration Unit 90 04
21