Driver Training - Gardner Denver TR20 Installation Operating & Maintenance Manual

CAUTION
Stop the package immediately if
the engine or compressor begins
to operate erratically.
4990497003 Date: 11/2016
Commissioning
Correct Operation
• Avoid back pulses to the compressor from the application.
• Adjust the mix or division of the air between aeration, top and boost valves on
the powder tank valve so that the materials flow smoothly.
• Watch for any sudden changes in compressor or engine operation.
• Observe correct operation of the compressor relief valve.
Stopping the compressor
• Return the engine speed to tick over
• Disengage the PTO.
• Stop the engine.
4.6 TR20 Driver training
All drivers should be given training, including:-
Safety
Instruct the driver regarding:
• Rotating parts
• Hot pipework
• Safety valve
• Safety coupling
Operation
Instruct the driver regarding:
• Speed range
• Maximum operating pressure
• PTO engagement
• Unloading valve
Routine Maintenance
Instruct the driver regarding:
• Gearbox oil - topping-up and replacement
• Air filter - cleaning/replacing
• Pipe connections - checking
• Relief valve function
TR20 Installation, Operating & Maintenance Manual Page 20