Set Up And Operation; Control Modes; One Infinity (Stand-Alone); One Infinity (Manual) - Infinity S601 Profile Manual

Infinity S601 Profile

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.

Control Modes

There are 5 modes:

One Infinity (Stand-alone)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Infinity is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see pages 34 for more information about Stand-alone mode.

One Infinity (Manual)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Infinity is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see pages 33 for more information about Manual mode.
Ordercode: 41507
● Stand-alone
● Manual
● DMX-512 (37CH, 57CH)
● W-DMX (37CH, 57CH)
● ArtNet (37CH, 57CH)
11