Table of Contents
Advertisement
Infinity S601 Profile
Start-Up
The display is equipped with a touch screen, which means that the options can be accessed in 2 ways:
●
By turning (to select/adjust the values) and pressing the control (to confirm).
●
By touching the options directly on the screen.
Please note, that some options can be accessed ONLY by turning/pressing the control and the touch
screen will not work.
01) Upon start-up, the device will show the start screen:
02) You can now see the current DMX starting address and the currently selected control protocol and
the channel mode.
03) If W-DMX is active, the W-DMX indicator
●
If the Infinity is not assigned to a transmitter, the
●
If the Infinity is assigned to a transmitter but DMX is not present, the
●
If the Infinity is assigned to a transmitter and DMX is present, the
●
If the Infinity is being linked to a transmitter or lost the connection with the transmitter, the
indicator will blink quickly.
Safety Lock
01) Select ENTER on the display to gain access to the main menu.
02) If the safety lock is active (see page 30 for more information), you will need to insert the 4-digit safety
code. If the safety lock is not active, skip steps 2-4 and proceed to step 5:
03) The universal master code is: 6468. Type the code in using the touch screen or by turning and
pressing the control. It is also possible to set up your own personal safety code (see page 30 for more
information). Select OK in order to confirm the code.
04) If you wish to activate the safety lock again, press and hold down the control for 3 seconds.
05) The display will now show the main menu. Please see the next page.
No Reset Start-Up
It is not required to turn the Infinity on, in order to adjust the device's settings. It is possible to activate only the
display. There are 2 possibilities:
●
Press and hold down the control for 3 seconds. The Infinity will remain off and the display will be on.
●
Upon power-up, press and hold down the control and, at the same time, supply power. The Infinity will
start without a reset and the display will function regardless of the supplied power of the lack thereof.
Ordercode: 41507
will appear on the screen.
indicator will be gray.
24
indicator will blink slowly.
indicator will be green.
Advertisement
Table of Contents
