MULTIQUIP WHITEMAN Series Operation Manual page 35

Hydraulic ride-on trowel
Hide thumbs Also See for WHITEMAN Series:
Table of Contents

Advertisement

TROWELING
1. Press down on the right side of the engine speed
rocker switch (rabbit) until the desired engine speed
is achieved (Figure 24).
NOTICE
Engine Speed Safety Interlocks
Full engine speed is allowed only when operator
presence is detected (sitting in seat).
Engine speed changes to idle when the operator leaves
the seat or the foot pedal is released for more than a
set period of time.
ENGINE SPEED
ROCKER
SWITCH
IDLE
SPEED
(TURTLE)
Figure 24. Engine Speed Rocker Switch
HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 35
FULL
SPEED
(RABBIT)
ENGINE SPEED
ROCKER
SWITCH
STEERING
Two joysticks (Figure 25 and Figure 26) located to the left
and right of the operator's seat provide directional control
for the trowel. Table 6 illustrates the various directional
positions of the joysticks and their effect on the trowel.
NOTICE
All directional references with respect to the joysticks
are from the operator's seat position.
Figure 25. Left Joystick Control
FORWARD
LEFT
REVERSE
Figure 26. Right Joystick Control
OPERATION
PALM
HANDLE
PALM
HANDLE
RIGHT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htxg6df

Table of Contents