Brocade Communications Systems 6542 Hardware Reference Manual page 49

FIGURE 11 Removing the fan modules
1. Fan 2 handle
2. Fan 2 release latch
4. Orient the new fan module to the insert position and push the fan handle towards the switch module.
You do not need to hold the fan module release latch while inserting the fan module. It auto-locks
itself.
5. Slide the fan module into the switch module until the fan module is firmly seated.
6. Verify that the fan module LEDs are functioning correctly.
Brocade 6542 Blade Server SAN I/O Module for Inspur Shangri-la Chassis Hardware Reference Manual
53-1003885-01
Managing the Switch Module
49