Kyocera TORQUE G04 Basic Manual page 66

◎ Make sure that the battery pack is correctly
attached and connection is correct if the
charging lamp of the product blinks in red. If
the indicator keeps blinking, stop charging and
then contact an au shop or Repair and Delivery
Support Center.
◎ Close the USB cover firmly after charging to
prevent moisture and dust from entering. Do not
pull or twist forcefully.
◎ Do not wirelessly charge while the specified
charger (sold separately) or USB Type-C cable
(commercially available) is connected to the
product. The product will not charge properly, and
it may also cause malfunctioning.
◎ Keep a metal accessory or conductive materials
(metal pieces, pencil lead, etc.) from coming in
contact with the connection terminal and prevent
them from getting inside.
◎ A magnetic field created by current during
charging may affect the geomagnetic sensor.
Charging with the Specified
AC Adapter
How to charge the product using Type-C Common
AC Adapter 02 (sold separately) is described
here. For details on the specified AC adapter (sold
separately), see "Related Accessories" (▶P. 91).
1
Insert the power plug of Type-C
Common AC Adapter 02 (sold
separately) into an outlet (100 to 240
VAC)
Type-C Common AC Adapter 02
(sold separately)
2
Open the USB cover of the product
65 65