Windows-Based Program Control; Installing The Software; Using The Software - Extron electronics MVC 121 User Manual

im Vertrieb von
Remote Control, cont'd
www.camboard.de
3-8 MVC 121 • Remote Control
CAMBOARD Electronics

Windows-based Program Control

Installing the software

Using the software

Tel. 07131 911201
Fax 07131 911203
The Extron Audio Products Control Program is compatible with
Windows 3.1/3.11, Windows 95/98, Windows NT, Windows ME,
Windows 2000, and Windows XP, and provides remote control
of the input gain/attentuation, output volume output
adjustment, and other features.
Updates to this program can be downloaded from the Extron
Web site (http://www.extron.com).
The program is contained on two 3.5" diskettes and can be run
from the floppy drive, or it can be installed and run from the
hard drive. To install the software on the hard drive, run
setup.exe from the floppy disk and follow the screen
instructions.
By default, the Windows installation creates a C:\Program
Files\Extron\AudProds folder and saves the program there.
To run the software:
1. Double click the Audio Products Control Program
icon in the Extron Electronics program group.
2. Click the comm port that is connected to the
unit's remote connector.
3. Click OK. The Audio Products Control Program main
window displays the input gain/attenuation settings for
each channel and allows the user to adjust them. The user
can also adjust the volume setting for the output channel.
See Setting output volume range limits in this chapter.
ce-info@camboard.de
MVC 121 • Remote Control
3-9