Table of Contents
Advertisement
DVD Menu Operations
Setting the TV Type
Make sure the format you need is available on
the disc. If not, your setting will be invalid.
4:3PS (Pan and Scan mode)
Select this if you have a conventional TV set and
your DVD is not formatted for wide screen
viewing. A wide picture will display on the whole
TV screen with a portion automatically cut off.
4:3LB (Letterbox mode)
Select this if you have a conventional TV set and
your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower
portions of the TV screen.
16:9 (Wide-screen TV)
Select this if you have a wide-screen TV set (you
must also set your wide screen TV to "full size").
4:3 PS
(Pan Scan)
4:3 LB
(Letter Box)
416:9
(Wide screen)
18
Changing the password
You can change the four-digit code used as
Password.
1
In disc mode, press SYSTEM MENU.
2
Select SYSTEM SETUP and press 4.
Press 5 / 4 on the remote control to navigate
3
in the menu.
➜ Move to "PASSWORD" and press
4
Use the numeric keys (0-9) to enter your
four-digit code.
➜ The password supplied by default is 0000.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
5
Enter your new code. Then press OK to
confirm.
6
Press SYSTEM MENU again to remove the
menu.
.
B
Advertisement
Table of Contents
