Numeric Keypad And Local-Function Keys - Data General Dasher D461 User Manual

AA·0616
local Function
Keys
Numeric
Keypad
Figure
3-5. Numeric Keypad
and
Local-Function Keys
• CURSR TYPE-Pressing this key changes the appearance of the
cursor. When the terminal is turned on, the cursor is displayed as
a reverse-video block. Pressing CURSR TYPE once causes the
cursor to appear as a blinking underline. Subsequent depressions
of CURSR TYPE cause the cursor to disappear, appear as a
blinking reverse-video block, and return to its original form as a
nonblinking reverse-video block.
The cursor appearance can also be changed with the Terminal
Configuration menu. A selection of the cursor type made via the
Terminal Configuration menu becomes effective only after power
up or after reset (pressing the CMD and ERASE PAGE keys
simultaneously.) Press the CMD and N/C keys to access the
menu. After moving the cursor to the CURSOR TYPE in the left
column, you can select reverse-video block, blinking underline, or
blinking reverse-video block or none. Refer to Chapter 2 for
Operation 3-17