Advertisement
sides to make the key to grapple the host, then, pull out gently, after which, the host may be
removed from the support; Then, remove the power line and horn line, and unplug the antenna
Schematic diagram of installation and dismantling:
plug.
•
Schematic diagram of installation
1.
The host will be placed as per the installation position before installing the host, which shall
connect to corresponding horn line and power line.
2.
The host can be fixed after the host running effect is satisfactory.
•
Host installation
1.
Install the support on the instrument board, and bend the part of support for positioning.
2.
Connect the power line and horn line, and fix the stator on the vehicle.
3. Push the host into the support, and tighten the retaining nut of stator.
•
Host dismantling
Loosen the retaining nut of stator; Insert two dismantling key into the gap between the left and right
sides to make the key to grapple the host, then, pull out gently, after which, the host may be
removed from the support; Then, remove the power line and horn line, and unplug the antenna
plug.
Advertisement
