Trouble Shooting; Engine - Barko 6025 Service Manual

Use this section only as a general guide to finding solutions for machine problems.
If the machine should malfunction, find the problem in the headings listed then refer to the possible causes and
remedies listed with the problem.
The list of problems, causes, and remedies will only give an indication of where a possible problem can be and what
repairs are needed.
More, or other, possible servicing may be needed beyond the recommendations in the list or a factory service man
may be required.

ENGINE

ENGINE ENGINE
ENGINE ENGINE
PROBLEM PROBLEM PROBLEM
PROBLEM PROBLEM
Engine cranks but will not start or starts
hard.
Low engine oil pressure.
Engine overheats.
Engine will not start.

TROUBLE SHOOTING

TROUBLE SHOOTING TROUBLE SHOOTING
TROUBLE SHOOTING TROUBLE SHOOTING
CAUSE CAUSE CAUSE
CAUSE CAUSE
Fuel tank empty.
Water in fuel or water frozen in fuel
lines. Water frozen in fuel filter.
Debris or dirt in fuel.
Air filter element restricted with dirt,
snow, or water.
Air intake pipe screen plugged.
E-Stop is pressed
Low engine oil level.
Low viscosity - (using too light of oil
in summer.)
Low coolant level.
Loose, worn, or broken fan belt.
Radiator plugged.
Air filter elements plugged.
Low or discharged battery.
E-Stop is pressed
page 55 page 55 page 55 page 55 page 55
240 Harvester Feller/
Buncher
R E M E D Y R E M E D Y R E M E D Y
R E M E D Y R E M E D Y
Check fuel level. Fill as necessary.
Thaw and /or drain water from fuel
tank. Thaw ice in fuel lines and
drain. Install new fuel filter.
Drain and flush fuel system. Change
fuel filter.
Clean or replace filter elements.
Clean air intake pipe screen.
Check engine oil level. Fill to correct
level. Check for and repair, any
leaks.
Drain engine oil and fill with heavier
weight engine oil.
Fill to correct level and check for
leaks.
Tighten or replace belt.
Clean and inspect radiator.
Clean or replace elements.
Recharge battery.