Iqan Xa2; Blink Codes - Barko 6025 Service Manual

BLINK CODES

BLINK CODES BLINK CODES BLINK CODES BLINK CODES
If one of the following error is detected, a message will be presented on the display together with an error code on the
module. In some cases, the module will turn off or at least shut down the outputs, to increase safety.
Don't use the machine if an error message or error code is activated.
The following sections will present what measures to take for different error situations put into
appropriate context.
LED indicator showing different XA2 modes
Status
Normal operation (yel.)
Error Error
code
1:n
See note
2:n
See note
3:1 CAN error
3:2 Address error
4:1
Memory error
FE Fatal error
a. Error groups 1:n and 2:n are controlled by the master.
b. FRAM memory error.

IQAN XA2

IQAN XA2 IQAN XA2
IQAN XA2 IQAN XA2
The location of the LED indicators on the IQAN-XA2 module.
WARNING WARNING WARNING
WARNING WARNING
Flash
Primary Flash (red)
Error category
a
a
b
page 34 page 34
240 Harvester Feller/
Buncher
Yellow/ red, status LED
Green, power on
Secondary Flash (yellow)
Error description
page 34 page 34 page 34