Table of Contents
Advertisement
7.3.2
7.3.3
Building Technologies
Fire Safety & Security Products
File commands
These commands are meant for remote technical maintenance and diagnostic of
the NK8237 units. The commands apply to the file selection active in the list on the
left hand side of the screen.
Download file
Transfer the selected file from the NK8237 .
Upload file
Transfer the selected file to the NK8237 (to upload diagnostic files see Uploading
diagnostic files [➙ 52]).
Delete/rename file
Delete or Rename the selected file in the NK8237.
Refresh
Update the file list.
Properties
Display the detailed properties if the selected file.
Download Reset NK
Download a file that forces the NK8237 to perform a software reset.
Edit Configuration File
Edit/View the INI file containing the NK8237 configuration.
Edit Diagno.log
Edit/View the diagnostic file (see Uploading diagnostic files [➙ 52]).
Edit EEprom.log Event.log
Edit/View the diagnostic file (see Uploading diagnostic files [➙ 52]).
FTP mode
Set the FTP connection mode to Active (default) or Passive (needed if a firewall is
active in the PC).
Diagnostic functions
Reset NK
Allows you to reset an NK8237 from a remote location.
Note: This function is only available when logged in as user "admin".
Save EEProm on file
Stores the content of the EEProm in the file EEProm.LOG on the NK8237 flash
disk.
Set System Time
Sets the RTC (Real Time Clock) of NK8237 to the PC system time.
Note: This function is only available when logged in as user "admin".
Set Date Time
Opens a window for setting date and time and downloads the new settings to the
RTC of NK8237.
Note: This function is only available when logged in as user "admin".
Maintenance and diagnostics
The NW8204 maintenance and diagnostic tool
7
49
A6V10403182_a_en
30.09.2014
Advertisement
Table of Contents
