Table of Contents
Advertisement
Configuration
6
Configuring the routing table
40
Building Technologies
Fire Safety & Security Products
Routing table upload and check
Using dynamic routing
Dynamic routing makes use of the Open Shortest Path First (OSPF) protocol.
OSPF automatically manages the shortest routing paths available in complex
networks.
To enable dynamic routing, proceed as follows:
1. In the Routing protocol section of the Routing tab, select the Enable dynamic
routing (OSPF) check box.
NOTE: To use the OSPF protocol, you must enable the dynamic routing for all
NK8237 in the network.
2. Add a route only in the NK8237 connected to the GAP unit of the fire
subsystem, according to the network configuration.
A6V10403182_a_en
30.09.2014
Advertisement
Table of Contents
