Siemens NK8237 MP4.70 Installation Function & Configuration Commissioning Safety Regulations page 44

Configuration
6
Downloading the NK8237
44
Building Technologies
Fire Safety & Security Products
Controlling and checking the unit status
The Tools tab of the NK823x unit provides some control commands and a screen
status report of the unit. It allows for:
Commanding a remote reset of the unit (that will disconnect the unit for about

one minute).
Setting date & time in the unit.

Executing ping and traceroute commands.

Reading a complete status report, which includes:

– Hardware version, e.g. NKM8001-A2.
– Firmware version (available on the PC and actually installed on the unit).
– Product Identifier (ID): NK8237.
– Delivery Date & Time.
– Add-on information: list of installed add-on components.
– Hardware configuration: 2 serial ports.
– Free RAM available (bytes).
– Kernel Version: Linux version and release date.
– Factory Burning Date (when the product burned-in).
– EEprom information: event logging and counters.
– Log Status: active, inactive, active after on-the-fly configuration changes
have been set (by NW8204 tool).
– Firewall Status: enabled, disabled.
– Routing Status: enabled, disabled.
Getting the unit status (point values).

A6V10403182_a_en
30.09.2014