SpringWell WS1 Installation Instructions Manual page 5

Installing the Well Water Filter Electronic Head
7) Install a bypass valve onto the
connections on the electronic
head.
10) Attach and tighten a MNPT
Fitting onto each of the
connections on the bypass
valve.
Well Water Filter System
8) Insert the rubberized
connections into the electronic
head openings and press it in
place.
Questions? Call (800)-589-5592
9) Fully tighten the fasteners on both
valve connections securing the bypass
valve.
11) Apply plumbers' tape to
both MNPT Fittings.
5